IMPORTANT!
•Charging is not performed while the connected computer is in the hibernate mode.
•A charging error can occur immediately after charging begins or some time after charging begins. A charging error is indicated by the back lamp flashing red.
•If low supply capacity exists due to your computer model or connection conditions, charging will start without the camera turning on. Turning on the camera in this case will cause charging to stop and enter USB data communication between the camera and the computer. The camera’s back lamp will be lit green at this time.
Other Charging Precautions
•With the two charging methods described above, you can charge the camera’s battery
•USB charging devices and power supply devices are subject to fixed standards. Use of an inferior device or a device that is not up to standard can cause malfunction and/or failure of your camera.
•Operation is not guaranteed in the case of a computer built or modified by you. Even in the case of a commercially available computer, certain USB port specifications may make it impossible to charge via the USB cable.
•A battery that is still warm immediately after normal use may not charge fully. Give the battery time to cool before charging it.
•A battery discharges slightly even when it is not loaded in the camera. Because of this, it is recommended that you charge the battery immediately before you need to use it.
•Charging the camera’s battery may cause interference with TV and radio reception. If this happens, plug the
•Actual charging time depends on current battery capacity and charging conditions.
•Do not use the
20 | Quick Start Basics |
|