Editing the Date and Time of an Image (Date/Time)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * “PLAY” Tab *
Date / Time
[8] [2] | Changes the setting at the cursor location. |
[4] [6] | Moves the cursor between settings. |
[0] (Movie) | Toggles between |
|
|
When the date and time settings are what you want, press [SET] to apply them.
NOTE
•The date and time stamped into an image using the Time Stamp (page 161) cannot be edited.
•You cannot edit the date and time of an image that is protected.
•You can input any date from 1980 to 2049.
Rotating an Image (Rotation)
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] * “PLAY” Tab
*Rotation
1.Use [8] and [2] to select “Rotation” and then press [SET]. Each press of [SET] will rotate the displayed image 90 degrees left.
2.When the displayed image is at the orientation you want, press [MENU].
NOTE
•Rotating a CS image causes all of the images in the CS group to be rotated. You cannot rotate individual component image in a CS group.
•Rotation of a panorama image is not supported.
•Note that this procedure does not actually change the image data. It simply alters how the image is displayed on the camera’s monitor screen.
•An image that has been protected or zoomed cannot be rotated.
•The original (unrotated) version of the image will be displayed on the image menu screen.
125Other Playback Functions (PLAY)