10-6-1

Sending a Screen Shot

10-6 Sending a Screen Shot

Use the following procedures to send a hardcopy of the screen directly to a connected personal computer (or CASIO Label Printer) or to save a screen shot in memory to send later. Screen shots can also be sent to a CASIO Label Printer.

Use the LINK Mode set up (u3(SET UP)) to specify whether you want to send the screen shot now or save it in memory.

uH-Copy

•{Dirct}/{Mem} ............. {direct send}/{save}

u To send a screen shot directly to a connected computer (or CASIO Label Printer) (Direct)

1.Connect the unit to the computer (or CASIO Label Printer).

On the computer (or CASIO Label Printer), perform the procedures required to set it up to receive data.

2.Display the screen you want to send.

3.Press u6(H-COPY).

u To save a screen shot in memory (Memory)

1.Display the screen you want to save.

2.Press u6(H-COPY).

•You can store up to 20 screen shots in memory. Saved screen shots are automatically assigned file names from Hcopy1 to Hcopy20.

#You cannot send the following types of screens to a computer or a Label Printer.

•The screen that appears while a data communication operation is in progress.

•A screen that appears while a calculation is in progress.

•The screen that appears following the reset operation.

•The low battery message.

#The flashing cursor is not included in the screen image that is sent from the unit.

#You cannot use 6mm wide tape to print a screen shot of a graph.

19990401