
Performing a Data Communication Operation
Sending unit
To set up the calculator to send data, press 1(TRNS) while the data communication main menu is displayed.
Press the number key that corresponds to the type of data you want to send.
•{Select} ... {selects data items and sends them}
•{Currnt} ... {selects data items from among previously selected data items and sends them}
•{Backup} ... {sends all memory contents, including mode settings}
•
u To send selected data items
Press b(Select) or c(Currnt) to display a data item selection screen.
•{Sel} ... {selects data item where cursor is located}
•{All} ... {selects all data}
•{Trns} ... {sends selected data items}
Use the f and c cursor keys to move the cursor to the data item you want to select and press 1(Sel) to select it. Currently selected data items are marked with “'”. Pressing 6(Trns) sends all the selected data items.
• To deselect a data item, move the cursor to it and press 1(Sel) again.
Only items that contain data appear on the data item selection screen. If there are too many data items to fit on a single screen, the list scrolls when you move the cursor to the bottom line of the items on the screen.
19990401