Connecting the Unit to a Personal Computer
10-3 Connecting the Unit to a Personal Computer
To transfer data and screen shots between the unit and a personal computer, you must connect them through a separately available CASIO
For details on operation, the types of computer that can be connected, and hardware limitations, see the user’s manual that comes with the
Some types of data may not be able to be exchanged with a personal computer.
u To connect the unit to a personal computer
1.Check to make sure that the power of the unit and the personal computer is off.
2.Connect the personal computer to the
3.Remove the cover from the connector of the unit.
4.Connect the unit to the
5.Turn on the power of the unit, followed by the personal computer.
•After you finish data communications, turn off power in the sequence: the unit first, and then the personal computer. Finally, disconnect the equipment.
|
| # Be sure you keep the connector cover in a | finish your data communications. |
|
| ||
|
| safe place so you can replace it after you |
|
|
|
|
|
19990401