MEMORY Mode
10-8 MEMORY Mode
This calculator has two separate memory areas: a “current area” and a “storage area.” The current area is a work area where you can perform input data, perform calculations and run programs. Data in the current area is relatively safe, but it can be deleted when batteries go dead and when you perform a full reset.
The storage area uses “flash memory,” so data is safe even when power is interrupted. Normally, you would use the storage area for data you need to store securely for long periods and load into the current area only when you need it.
Use the MEMORY Mode to transfer data between the current area and storage area, and to perform other memory management operations.
From the Main Menu, select the MEMORY icon to enter the MEMORY Mode and display its initial screen.
•{PROG} ...... {program file save, load, delete, search}
•{BACK} ...... {current area data backup and restore}
•{OPT} ......... {optimization of the storage area}
kStoring and Loading Program Files
Use the following procedures to store a current area program file into the storage area, and to load a file from the storage area into the current area.
19990401