
Connecting the Unit with a CASIO Label Printer
10-2 Connecting the Unit with a CASIO Label Printer
After you connect the unit to a CASIO Label Printer with cable, you can use the Label Printer to print screen shot data from the unit (see
•The operation described above can be performed using the following Label Printer models:
uTo connect the unit to a Label Printer
1.Check to make sure that the power of the unit and the Label Printer is off.
2.Connect the cable to the Label Printer.
3.Remove the cover from the connector of the unit.
4.Connect the other end of the cable to the unit.
5.Turn on the power of the unit, followed by the Label Printer.
Label Printer
Cable
•After you finish data communications, turn off power in the sequence: the unit first, and then the Label Printer. Finally, disconnect the equipment.
|
| # Be sure you keep the connector cover in a | finish your data communications. |
|
| ||
|
| safe place so you can replace it after you |
|
|
|
|
|
19990401