•See “Adjusting Display Contrast” for information about how to use “]CONT'”.
Specifying the Input/Output Format
For this input/output format: Perform this key operation:
Math | 1N1(MthIO) |
Linear | 1N2(LineIO) |
•Math format causes fractions, irrational numbers, and other expressions to be displayed as they are written on paper.
•Linear format causes fractions and other expressions to be displayed in a single line.
Math
| Math Format | Linear Format | |
Specifying the Default Angle Unit | |||
|
|
|
|
To specify this as the default | Perform this key operation: | ||
angle unit: |
| ||
Degrees | 1N3(Deg) | ||
|
|
|
|
Radians | 1N4(Rad) | ||
Grads | 1N5(Gra) | ||
90° = | π | radians = 100 grads |
|
2 |
|
| |
Specifying the Number of Display Digits | |||
|
|
|
|
To specify this: | Perform this key operation: | ||
Number of Decimal Places | |||
Number of Significant Digits | |||
Exponential Display Range | 1N8(Norm)1(Norm1) | ||
|
|
| or 2(Norm2) |
Calculation Result Display Examples
•Fix: The value you specify (from 0 to 9) controls the number of decimal places for displayed calculation results. Calculation results are rounded off to the specified digit before being displayed.
Example: 100 ⎟ 7 = 14.286 (Fix3)
14.29(Fix2)
•Sci: The value you specify (from 1 to 10) controls the number of significant digits for displayed calculation results. Calculation results are rounded off to the specified digit before being displayed.
Example: 1 ⎟ 7 = 1.4286 ⋅