STAT Editor Screen
There are two STAT editor screen formats, depending on the type of statistical calculation you selected.
STAT |
| STAT |
|
|
|
•The first line of the STAT editor screen shows the value for the first sample or the values for their first pair of samples.
FREQ (Frequency) Column
If you turn on the Statistical Display item on the calculator’s setup screen, a column labeled “FREQ” will also be included on the STAT editor screen.
You can use the FREQ column to specify the frequency (the number of times the same sample appears in the group of data) of each sample value.
Rules for Inputting Sample Data on the STAT Editor Screen
•Data you input is inserted into the cell where the cursor is located. Use the cursor keys to move the cursor between cells.
STAT
Cursor
•The values and expressions you can input on the STAT editor screen are the same as those you can input in the COMP Mode with Linear format.
•Pressing Awhile inputting data clears your current input.
•After inputting a value, press =. This registers the value and displays up to six of its digits in the currently selected cell.
Example: To input the value 123.45 in cell X1
(Move the cursor to cell X1.)
STAT
123.45
The value you input appears in the formula area.
STAT
=
Registering a value causes the cursor to move down one cell.