
Drawing and Editing Objects
2. Move the pointer close to the object you want to select.
• This will cause marks to appear on some part (vertex, side, etc.) of the object.
3. Press x or perform the following operation: 2(Edit) – 4:Select Figure.
• This selects the entire object.
uTo deselect a particular object
1. If any tool icon is in the upper right corner of the screen, press J or o to deselect the tool.
2. Move the pointer close to the object you want to deselect.
• This will cause the k mark(s) to become highlighted.
/
3. Press w.
• This will deselect the object, which causes the k mark(s) to disappear.
uTo select all objects on the screen
Perform the following operation: 2(Edit) – 2:Select All.
uTo deselect all objects on the screen
Press o or perform the following operation: 2(Edit) – 3:Deselect All.
20060601