5-12

Using the Measurement Box

3. Press e to highlight the up arrow button on the right side of the measurement box and then press w.

• This will display a menu.

4. Use f to move the highlighting to [Paste] and then press w.

This will cause the measurement in the measurement box to be pasted into the screen image. At this time, the pasted measurement text is selected.

/

5. Move the text to another location on the screen, if you want.

Press v and then use the cursor keys to move the pasted measurement around the screen. For details, see “To move an object” (page 2-20).

/

Note

You can also paste the measurement that is currently in the measurement box into the screen image by pressing !j(PASTE) while the measurement box is highlighted in step 2 of the above procedure.

Editing a Measurement Type Tag

When you paste a measurement into a screen image using the “To paste a measurement into a screen image” procedure on page 5-11, a measurement type tag (text or a symbol) is appended in front of the measurement value to indicate the measurement type.

Examples: Length

Angle (Internal)

Angle (Supplementary)

You can edit or delete the measurement type tag as required.

20060601