
| ||
| Working with Animations | |
|
| |
When you want to do | Perform this procedure: | |
this: | ||
| ||
|
| |
Delete the animation | 1. Use c and f to move the highlighting on the Edit | |
assigned to point E | Animations screen to “E”, which is located under | |
| “Animations”. | |
| 2. Press 1(DEL). | |
| • This deletes the animation assigned to point E and | |
| causes “E” (along with the “t0” and “t1” values under it) to | |
| disappear from under “Animations” screen. | |
| Note | |
| Selecting “Animations” in step 1 and then pressing 1(DEL) | |
| will delete the animations assigned to all points. | |
|
| |
Turn off trace for point D | 1. Use c and f to move the highlighting on the Edit | |
| Animations screen to “D” under “Traces”. | |
| 2. Press 1(DEL). | |
| • This turns off trace for point D and causes “D” to | |
| disappear from under “Traces”. | |
| Note | |
| Selecting “Traces” in step 1 and then pressing 1(DEL) will | |
| turn off trace for all points. | |
|
|
3. After all the settings are the way you want, press J.
• This will close the Edit Animations screen.
20060601