
| ||
| Working with Animations | |
|
| |
When you want to do | Perform this procedure: | |
this: | ||
| ||
|
| |
Specify the number of | 1. Use c and f to move the highlighting on the Edit | |
steps to be used as | Animations screen to “Steps” and then press 1(Step). | |
point E travels along line |
| |
segment AB |
| |
| / | |
| 2. On the dialog box that appears, input an integer from 2 | |
| through 100 and then press w. | |
|
| |
Specify the start point | 1. Use c and f to move the highlighting on the Edit | |
and the end point of the | Animations screen to “t0”, which is located just under the | |
movement of point E | “E” of “Animations”. | |
along line segment AB |
|
2. Input a number from 0 to 1.
•t0 specifi es the start point for point E movement along line segment AB. Inputting a value of 0 specifi es point A as the start point, while a value of 1 specifi es point B. Specifying 0.5 specifi es the center of line segment AB. A value smaller than 0.5 shifts the start point towards point A, while a larger values shift towards point B.
3. After specifying a value for t0, press w.
• This will highlight “t1”.
4. Input a value from 0 to 1 and then press w.
•t1 specifi es the end point for point E movement along line segment AB. Inputting a value of 1 specifi es point B as the end point, while a value of 0 specifi es point A.
20060601