3-2

Controlling the Appearance of the Geometry Window

uTo toggle integer grid display on and off

1. Press !m(SET UP) to display the Setup screen.

2. Use c to move the highlighting to “Integer Grid”.

3. Use the following key operations to select the setting you want.

To select this setting:

Press this key:

Integer grid on

1(On)

Integer grid off

2(Off)

4. After the setting is the way you want, press J.

Note

When you plot or move a point while the integer grid is turned on, the point will snap to the nearest grid location. Turn on integer grid when you want all of the points on a graph to be located at integer value coordinates.

Configuring View Window Settings

You can confi gure View Window settings to specify the coordinates of the screen’s left edge (Xmin) and right edges (Xmax). The length of the y-axis is confi gured automatically using a ratio of 1:2 (y-axis:x-axis), but you can specify what part of the y-axis is in the middle of the screen (Ymid).

Ymid

Xmin

Xmax

20060601