Casio handheld terminals, DT-X11 Series manual Continue

Laser Scanner (DT-X11M10E and DT-X11M10RC)

	Method	Semi-conductor laser light
	Laser emitting angle	Straight
	Wave length	650±10 nm
	Optical output	<1 mW
	No. of scannings	100±20 times per second
	Resolution	0.127 mm (minimum)
	PCS	0.45 (minimum)	Print contrast signal
	Readable distance	Approximately 40 to 300 mm
	Readable width	Max. 40 mm	When the distance is at 40 mm.
		Max. 238 mm	When the distance is at 300
			mm.
	Daylight for scanning	50,000 Lux or less
	Readable 1D bar code	EAN8/JAN8, EAN13/JAN13, UPCA,
	symbologies	UPCE, Code39, Codabar(NW7), Interleaved
		2of5(ITF), Code93, Code128(EAN128),
		MSI(Plessey), IATA, Industrial 2of5(IDF),
		RSS-14, RSS Limited,
		RSS Expanded
Display
	Display device	3.5-inch 2-Way TFT color LCD
	No. of dots	240 (h) x 320 (w)
	Dot pitch	0.22 (h) x 0.22 (w) mm
	Display font	Scalable font	See note 1
	Backlight	LED
Indicator
	Confirmation /Status	LED x 2 pcs in red/green	Left: Programmable
			Right: Battery charge status
Input
	Keyboard	Numeric (Alphabet) keys, CLR key, Execute
		key, Fn key, Text key, Cursor key
	Control keys	Power ON/OFF key, Reset switch
	Trigger keys	2 keys ( on the left and right sides)
	Touch panel	Plastic panel (Resolution 240 x 320)
		Possible to display character input pad
IrDA interface
	Standard	IrDA ver.1.1 compatible
	Communication	Half duplex
	process
	Synchronization	Start/Stop bits
	Baud rate (in bps)	9,600/115,200/4M
	Communication range	0 (contact) to 1m	Max. 0.25m at 4Mbps

Continue.

18