Casio IT-500 E-15

E-15

2

Load a battery pack (DT-5123BAT) or large-capacity battery pack (DT-5124LBAT).

Take care that the battery pack is oriented correctly when you load it. In addition,

load the battery back while making sure that the end of the battery pack removal

tape is protruding above the battery pack.

3Replace the rechargeable battery pack cover as shown in the diagram and then

return the rechargeable battery pack cover switch to the “LOCK” position. When

loading a large-capacity rechargeable battery pack, mount the large-capacity

rechargeable battery pack cover.

4.Hold down the power key for about one second to turn on the Handheld Terminal.

Start up the application you want to run.

Using the stylus

Tap: Lightly tap with the stylus once on the touch screen.

Tap and Hold: Hold the tip of the stylus on the touch screen without moving it.

Drag: Hold the tip of the stylus on the touch screen as you drag from one location to

another. This operation is the same as writing with a pencil on a piece of paper.

2

3

1

Contents

Main Handheld Terminal Users Guide PN410372-002 Series Page Safety Precautions Warning! E-3 Foreign Objects Location Heavy Objects LCD Screen Optional Lithium-ion Battery Pack Danger E-5 E-6 AC Power Supply Page E-8 Operating Precautions E-9 Important After Service E-10 We, the undersigned. certify and declare under our sole responsibility that the following equipments: Page E-12 Contents E-13 E-14 Before Getting Started E-15 Handheld Terminal System Configuration Page Page E-19 General Guide E-20 E-21 Replacing the Battery This guide uses the following terms to refer to the batteries. Replacing the Battery Pack Always keep backup copies of all important data! Page Page Attaching the Neck Strap E-25 Attaching the Touch Screen Protective Sheet E-26 Configuring Handheld Terminal Settings Calibrating Touch Screen Alignment E-27 Adjusting Display Contrast Adjusting Display Brightness Display Auto Dimmer E-28 Using the Laser Scanner E-29 Warning Label Bar Code Scanning Position Warning! Never look directly into the laser light. Margin Margin Good Good Good Bad Bad Bad Bad E-30 Performing Data Communication IR Data Communication E-31 BluetoothTM Data Communication (IT-500M30B/M30CB) E-32 Resetting the Handheld Terminal If reset does not find a memory problem If reset finds a memory problem E-33 Performing a Full Reset (Initialization) To perform a full reset E-34 IT-500 Specifications E-35 **In the case of Standby (20): Operation (1): Scanning (1): Wireless (1) E-36 Using the Bridge Satellite Cradle (IT-564IOE)/Bridge Basic Cradle (IT-560IOE) E-37 E-38 Connecting the AC Adaptor and Connecting to Computer E-39 E-40 Configuring DIP Switch Settings (IT-564IOE only) Not used (Always off) Not used (Always off) Host Computer Interface Daisy Chain Connection Type Bridge Satellite Cradle Data Rate E-41 Using Wall Mount Unit Page E-43 Connecting Multiple Bridge Satellite Cradles (IT-564IOE) E-44 Bridge Satellite Cradle (IT-564IOE)/Bridge Basic Cradle (IT-560IOE) Specifications E-45 Using the Cradle-type Battery Charger E-46 E-47 Connecting the AC Adaptor for Cradle-type Battery Charger Important ! E-48 Using Wall Mount Unit Cradle-type Battery Charger (IT-569CHGE) Specifications E-49 Using the Dual Battery Charger E-50 Charging a Battery Pack E-52 Connecting Multiple Dual Battery Chargers E-53 Dual Battery Charger (DT-5122CHG) Specifications E-54 Using Rechargeable Battery Pack Battery Pack Specifications Large-capacity Battery Pack Specifications E-55 Using the Level Converter Cable