4.Turn on the power. This causes the Bridge Satellite Cradle/Bridge Basic Cradle power indicator lamp to light in red.

5.Making sure that their two IR ports come into contact with each other, place the IT-500 onto the Bridge Satellite Cradle/Bridge Basic Cradle. This causes the Bridge Satellite Cradle/Bridge Basic Cradle power indicator lamp to light in green.

If the system is operating normally and data communication is enabled, the system status indicator lamp lights in green.

The communicator indicator lamp flashes in green when communication starts via a serial interface (RS-232C/RS-422).

When charging is initiated, indicator 1 on the IT-500 lights up in red. When charging has been completed, indicator 1 on the IT-500 changes color from red to green.

Important!

A high-sensitivity communication element is used during IR data communication.

In order to ensure successful communication, avoid using cellular phones or other devices that emit radio wave in the area where you are performing IR data communication.

If you need to use such a device, move away from the communicating Handheld Terminals. In case of a cellular phone, keep it at least 30cm (1178") away.

Take care to avoid allowing the Bridge Satellite Cradle/Bridge Basic Cradle power contacts to become connected to each other, which creates a short.

Shorting the power contacts can damage the Cradle.

E-39

Page 41
Image 41
Casio IT-500 manual Shorting the power contacts can damage the Cradle