Connections

Phones/Output JackPREPARATION

•Before connecting headphones or other external equipment, be sure to first turn down the volume settings of the keyboard and the connected equipment. You can then adjust volume to the desired level after connections are complete.

[Rear Panel]

PHONES/OUTPUT jack

 

1

Audio connection

Stereo standard plug

 

 

White

Red PIN plug

2

LEFT

RIGHT

 

AUX IN or similar terminal

3 Keyboard amp,

of audio amplifier

guitar amp, etc.

 

 

Connecting Headphones (Figure 1)

Connecting headphones cuts off output from the keyboard’s built-in speakers, so you can play even late at night without disturbing anyone.

Audio Equipment (Figure 2)

Connect the keyboard to an audio equipment using a commercially available connecting cord with a standard plug on one end and two PIN plugs on the other end. Note that the standard plug you connect to the keyboard must be a stereo plug, otherwise you will be able to output only one of stereo channels. In this configuration, you normally set the input selector of the audio equipment to the terminal (usually marked AUX IN or something similar) where the cord from the keyboard is connected. See the user documentation that comes with your audio equipment for full details.

Musical Instrument Amplifier (Figure 3)

Use a commercially available connecting cord to connect the keyboard to a musical instrument amplifier.

NOTE

•Be sure to use a connecting cord that has a stereo standard plug on the end you connect to the keyboard, and a connector that provides dual channel (left and right) input to the amplifier to which you are connecting. The wrong type of connector at either end can cause one of the stereo channels to be lost.

When connected to a musical instrument amplifier, set the volume of the keyboard to a relatively low level and make output volume adjustments using the amplifier’s controls.

Connection Example

PIN plug (red)

PIN jack

To keyboard’s

INPUT 1

PHONES/OUTPUT

INPUT 2

jack

 

PIN plug (white)

Standard plug Keyboard or

Stereo standard plug

 

guitar amp

USB port

You can also connect the keyboard to a computer. See “Connecting to a Computer” on page E-48 for details.

Sustain/Assignable Jack

You can connect an optional sustain pedal (SP-3 or SP-20) to the SUSTAIN/ASSIGNABLE JACK to enable the capabilities described below.

For details on how to select the pedal function you want, see “SUSTAIN/ASSIGNABLE JACK (Default: SUS)” on page E-51.

SUSTAIN/ASSIGNABLE JACK

SP-20

Sustain Pedal

•With piano tones, depressing the pedal causes notes to linger, much like a piano’s damper pedal.

•With organ tones, depressing the pedal causes notes to continue to sound until the pedal is released.

Sostenuto Pedal

•As with the sustain pedal function described above, depressing the sostenuto pedal causes notes to be sustained.

•This difference between a sostenuto pedal and sustain pedal is the timing. With a sostenuto pedal, you press the keys and then depress the pedal before you release the keys.

•Only the notes that are sounding when the pedal is depressed are sustained.

Soft Pedal

Depressing the pedal softens the sound of the notes being played.

Rhythm Start/Stop Pedal

In this case, the pedal performs the same functions as the START/STOP button.

659A-E-017A

E-15