Connection to a Computer
NOTE
•This keyboard supports SMF 0 and 1 format data.
•Voice Fingering Guide,
General MIDI Tone
The General MIDI standard defines the tone numbering sequence, the drum sound numbering sequence, the number of MIDI channels that can be used, and other general factors that determine the sound source configuration. Because of this, musical data produced on a General MIDI sound source can be played back using similar tones and identical nuances as the original, even when played on another manufacturers sound source.
This keyboard conforms with General MIDI standards, so it can be connected to a computer and used to play back General MIDI data that has been purchased, downloaded from the Internet, or obtained from any other source.
Changing the Settings
This section tells you how to make the settings required when connecting to a computer.
KEYBOARD CHANNEL (Default: 1)
The keyboard channel is the channel used to send messages from this keyboard to a computer. You can specify one channel from 1 to 16 as the keyboard channel.
1Press the FUNCTION button until the KEYBOARD CHANNEL screen appears.
K e y b d C h
Example: To specify channel 4
K e y b d C h
NAVIGATE CHANNEL (Default: 4)
When messages are received from a computer for play on this keyboard, the navigate channel is the channel whose note data appears on the display. You can select one channel from 01 to 16 as the navigate channel. Since this setting lets you use the data on any channel of commercially available SMF data to light on the
N a v i . C h
Example: To specify channel 2
N a v i . C h
To turn off specific sounds before playing back tune data that is being received
<<Navigate channel on/off>>1While playing tune data, press the TRACK 2 button.•This cuts the sound of the navigate channel, but on- screen keyboard guide keys continue to light in accordance with the channel’s data as it is received. Press TRACK 2 button again to turn the channel back on.
<<Next lower channel from navigate channel on/off>>1While playing tune data, press the TRACK 1 button.•This cuts the sound of the channel whose number is one less than the navigate channel, but
Example: If the navigate channel is channel 4, the above operation turns off channel 3.
LOCAL CONTROL (Default: On)
oFF: Anything played on the keyboard is output as a message from the USB port, without being sounded by the internal sound source.
•Note that no sound is produced by the keyboard if LOCAL CONTROL is turned off and no external device is connected.
1Press the FUNCTION button until the LOCAL CONTROL screen appears.Example: When LOCAL CONTROL is on
L o c a l