Casio LK93TV To transpose the keyboard, T r a n s, Transposing the Keyboard, Mode, upwards, i n g s, end range to be, of the split tone, power is turned on, LAYER SPLIT

			Keyboard Settings
2 Press the SPLIT button and then input the number		Transposing the Keyboard
of the split tone.		Transpose lets you raise and lower the overall key of the
		keyboard in semitone units. If you want to play an
	P i z z . S t r
		accompaniment for a vocalist who sings in a key that’s
		different from the keyboard, for example, simply use
		transpose to change the key of the keyboard.
	Indicator appears
• After specifying the split tone, press the SPLIT button		To transpose the keyboard
to unsplit the keyboard.		1 Press the RHYTHM button to enter the Rhythm
3 Press the LAYER button and then input the number
		Mode.
of the layered tone.		• Note that you cannot transpose the keyboard while
• Note that you can reverse steps 2 and 3, specifying		in the Song Bank Mode or Piano Bank Mode.
the layered tone first and then the split tone.		2 Use the KEY CONTROL/TRANSPOSE buttons
	F r . H o r n	( / ) to change the key of the keyboard.
		: Raises the key by one semitone
		: Lowers the key by one semitone
		Example: To transpose the keyboard five semitones
	Indicator appears
		upwards.
4 Press the SPLIT button or the LAYER button so both
			T r a n s .
of the SPLIT and LAYER indicators are displayed.

5Input the number of the layered split tone.

S t r	i n g s	NOTE
		•	The keyboard can be transposed within a range of –12
			(one octave downwards) to +12 (one octave upwards).
		• The default transpose setting is “00” when keyboard
6 Specify the split point.			power is turned on.
		•	If you leave the transpose screen on the display for about
• While holding down the SPLIT button, press the			five seconds without doing anything, the screen is
			automatically cleared.
keyboard where you want the leftmost key of the low
		•	The transpose setting also affects playback from memory
end range to be.
			and Auto Accompaniment.
7 Play something on the keyboard.		•	To return the keyboard to its default key, perform the
• Press the LAYER button to unlayer the keyboard, and			above procedure and press both of the KEY CONTROL/
			TRANSPOSE buttons ( and ) at the same time in
the SPLIT button to unsplit it.
			step 2. You could also use the [+] and [–] buttons to
LAYER SPLIT			change the transpose setting to “00”.
		•	The effect of a transpose operation depends on the pitch
			of each note and on the tone you are currently using. If
			a transpose operation causes a note to be outside of
			the allowable range for a tone, the same note in the
			nearest octave within the range will be substituted.
Split Tone (PIZZICATO STRINGS)	Main Tone (BRASS)
+	+
Layered Split Tone (STRINGS)	Layered Tone (FRENCH HORN)
Split point

659A-E-047A E-45