Chapter
15 Configuring the Unit
The System menu provides you with a number of items that you can use to set up the unit to suit your particular needs.
Note that the System menu is available on the menu bar while the Mode Menu is on the display.
Setting the Date, Time, and Auto Power Off Interval
1.Tap Menu Bar to display the menu bar, and then tap System – Set date/ time.
•You can also display the date/time setting screen by tapping the clock on the pop up tool screen (page 112).
2.Tap the date next to Set date. This causes a date keyboard to appear.
3.Use the date keyboard to input the date you want to set, and then tap NEXT.
•You can specify a date within the range of January 1, 1901 to December 31, 2099.
4.After setting the date, tap the time next to Set time. This causes a time keyboard to appear.
5.Use the time keyboard to input the time you want to set, and then tap NEXT.
6.After setting the time, tap the value next to Auto power off.
•Each tap of the value changes it in the cycle: 1 → 3 → 6 → 1, etc.
•The value you set specifies how many minutes the unit allows to pass without any operation being performed. After the specified number of minutes, power is turned off automatically.
7. Tap Set to register your settings.
157