
Chapter 16 Technical Reference
Message Table100 alarms are already set!
Cause: The maximum allowable | Action: Wait until some of the |
limit of 100 alarms are already set. | existing alarms are used, or delete |
| alarms you do not need to make |
| room for new ones. |
|
|
All dates you select must be within the same year. | |
|
|
Cause: You are trying to highlight | Action: The range of dates when |
dates for a period that spans multiple | specifying highlights must be within |
years. | one single year. Change your date |
| range specification so it is within the |
| same year. |
|
|
Batteries are getting weak! Replace them as instructed in the User’s Guide.
Cause: Battery power is getting | Action: Replace batteries as explained |
weak. | on page 21 of this User’s Guide. |
|
|
Cells in the range you are deleting contain data.
Delete them anyway?
Cause: Some of the cells in a range | Action: Tap Yes to delete the cells |
you are deleting in the Pocket Sheet | and the data they contain, or tap No |
Mode contain data. | to close the dialog box without |
| deleting anything. |
|
|
Check the secret memory area! | |
|
|
Cause: An alarm time has been | Action: Enter the secret memory |
reached for secret memory area data. | area to view details about the alarm. |
|
|
Check your home time setting and correct it if necessary! | |
|
|
Cause: This message appears after | Action: Since all alarms and other |
an operation that can affect your | timekeeping related operations are |
time settings. | based on your time setting, be sure |
| to check it and make corrections as |
| necessary whenever this message |
| appears. |
|
|
174