Chapter 1 Getting Acquainted

Auto Power Off

The Auto Power Off function automatically turns off power whenever you do not perform any operation for a specified period. You can specify 1 minute, 3 minutes, or 6 minutes before Auto Power Off is triggered (page 157).

Use the procedure described under “To turn power on and off” above to turn power back on.

Configuring the Start-up Screen

You can select a Quick-Memo (page 78) and use its contents as a start-up screen image. You can even use images from a personal computer, which you transfer to Quick-Memo using PC sync for Windows.

To select a start-up screen

1.Enter the Quick-Memo Mode.

2.Select the Quick-Memo whose data you want to use as the start-up screen.

• You can select a Quick-Memo by displaying its data screen.

3.Tap Menu Bar to display the menu bar, and then tap Option – Start- Up Screen.

•This specifies the data of the Quick-Memo you selected as the start-up screen, and enables start-up screen operation.

To enable and disable start-up screen operation

1.While the Mode Menu or Action Menu is on the display, tap Menu Bar to display the menu bar, and then tap Option – Screen Options.

2.On the configuration screen that appears, tap the check box next to the “Use start-up screen” option to toggle it on (checked) and off (unchecked).

3.Tap Set to register your setting.

22