Chapter 16 Technical Reference
1.Remove the cover and touch the screen with the stylus to turn on power.
2.Use the stylus to press the RESET button on the back of the PV Unit.
RESET
button
RESET
REPLACE BATTERIES | NORMAL OPERATION | ➜ |
•If the above does not appear on the display when you press the RESET button, slide the battery switch to the REPLACE BATTERIES position and remove the battery compartment cover. Use the stylus to press the P button and then replace the battery compartment cover. Slide the battery switch back to the NORMAL OPERATION position and then press the RESET button.
3. Tap the center of each of the four cross marks as they appear on the screen.
•The contrast adjustment screen appears next.
4. Tap Hor Jto adjust the contrast of the display, and then tap OK.
5.In response to the message that appears, tap Yes to reset the PV Unit and clear all memory contents, or No to abort the reset procedure without doing anything.
6.If you tapped Yes in the above step, a second confirmation message appears. Tap Yes to reset the PV Unit and clear all memory contents, or No to abort the reset procedure without doing anything.
• Tapping Yes in the above step starts the actual reset procedure.
168