Playing Back Built-in Tunes

NOTE

•You can also use the dial to change the tempo setting while the current setting is indicated by a value in brackets ([ ]) on the display.

Example: [T:120]

•The value indicates the number of beats per minutes.

•To return the tempo to its initial default setting, press the

TEMPO and buttons at the same time.

•At their initial default tempo setting, some Piano Group tunes may change tempo part way through. After you change the tempo setting for such a tune, playback will proceed at the tempo you selected, from the beginning of the tune to the end.

Skipping Forward through a Tune

1 While playback is in progress, hold down the FF button.

•This skips forward through the tune measure-by-measure.

•The measure number and beat number appear on the display while you are skipping forward.

0 0 3 : 1

Measure number

Beat number

Pausing Playback

1

While a tune is playing, press the PAUSE button.

 

• This pauses playback.

2

Press the PAUSE button again to restart playback from

 

the location where it was paused.

Skipping Back through a Tune

1

While playback is in progress, hold down the REW

 

button.

• This skips back through the tune measure-by-measure.

• The measure number and beat number appear on the display while you are skipping back.

2

When you reach the point you want, release the FF

 

button to resume playback.

Looping a Musical Phrase

You can select one or more measures and “loop” them, which means that they play again and again until you stop playback.

1

While the tune is playing, press the REPEAT button while

 

the measure you want the phrase to start from is playing.

 

• This causes the REPEAT indicator lamp to flash.

2

When playback reaches the measure you want to

specify as the end of the loop, press the REPEAT button again.

• This starts repeat play of the loop.

• To cancel repeat play of a loop, press the REPEAT button again so its indicator goes out.

0 0 6 : 1

Measure number Beat number

2

When you reach the point you want, release the REW

 

button to resume playback.

NOTE

•Depending on what is being played when you press the REW button, the skip back operation may not start right away when you press it.

Changing the Melody Tone of a Tune

You can select any one of the digital piano’s 248 built-in tones as the melody tone of a built-in tune. You can even change the melody tone setting while playback is in progress.

1

Press a TONE button.

2

Use the dial to select the tone you want.

NOTE

•You can return a tune to its preset default tone by selecting the tune again.

E-18

419A-E-020B

PX400R_e_17-28.p65

18

04.8.24, 4:34 PM