Using a Memory Card

Formatting a Memory Card

Use the procedure below to format a memory card.

IMPORTANT!

•Note that formatting a memory card that already contains data causes all of that data to be deleted. Data deleted by the format operation cannot be recovered. Before performing the procedure below, check to make sure that the memory card does not contain any data you might need.

Getting Ready

•Insert the memory card you want to format into the digital piano’s card slot. Make sure that the sticker is removed from the card’s write protect area, which enables writing.

To format a memory card

1

Press the CARD FUNCTION button.

 

• This causes the indicator lamp above the button to light.

2

Use the dial to display the “Format” screen.

3

Press the EXECUTE button.

 

• This will display a confirmation message asking whether

you really want to format the memory card.

Supported Input Characters

The following shows the characters you can input when inputting the name of a file being saved to a memory card.

4

Press the YES button to start formatting.

 

• The message “Please Wait” will remain on the display

 

while the format operation is being performed. Never try

 

to perform any other operation on the digital piano while

 

the card is being accessed. The screen in step 2 will

 

reappear after the format operation is complete.

 

• If you do not want to continue with the formatting

 

operation, press the NO button. This will return to the

 

screen in step 2.

5

After you are finished formatting the memory card, press

 

the CARD FUNCTION button so its indicator lamp goes

out.

419A-E-035B

E-33

PX400R_e_29-37.p65

33

04.8.24, 4:34 PM