Other Settings
USB Mode and MIDI Mode
Your digital piano has two data communication modes: a USB mode and a MIDI mode.
The USB mode is used when sending and receiving data via the digital piano’s the USB port, while the MIDI mode is used for data send and receive via its MIDI terminals.
USB Mode/MIDI Mode Switching
The digital piano will enter the USB mode automatically whenever a connection is established between it and the USB driver running on a connected computer. Any other time (when there is no USB connection between the digital piano and a computer), the digital piano is in the MIDI mode.
USB Mode
A c t i v e P o r t : U S B 0 0 0 0 0 0 0 0 0
•If you connect to a computer via the USB port before turning on power, the screen will show “USB” when you turn on power. Note that the screen also will show “USB” and the digital piano will enter the USB mode if you turn on power while there are connections to both the USB port and the MIDI terminals.
•The “USB” indicator will appear for about one second to indicate the USB mode whenever you connect to a computer via the USB port while the digital piano is turned on.
MIDI Mode
A c t i v e P o r t : M I D I0 0 0 0 0 0 0 0 0
•If you connect another device to the digital piano’s MIDI terminals (only) before turning on power, the screen will show “MIDI” when you turn on power.
•Disconnecting from the digital piano’s USB port while the digital piano is turned on will cause the “MIDI” indicator to appear for about one second to indicate the MIDI mode.
Expanding the Number of Built-in Tunes
You can transfer song data for up to 10 tunes (approximately 132 kilobytes) to digital piano memory and store it as Song Group tunes number 30 through 39.
You can obtain a copy of the special CASIO conversion software by downloading it at the Web page shown below. After downloading, install the software on your computer.
CASIO MUSIC SITE
http://music.casio.com/
*In addition to the software itself, the CASIO MUSIC SITE will also provide you with information about its installation and use. You can also find out about how to connect your computer and digital piano, the latest news about your digital piano and other CASIO musical instruments, and much more.
Deleting a User Song
Use the following procedure to delete a user song you have loaded to digital piano memory from your computer.
1 | Hold down the SONG/USER button until a user song | |
| selection screen appears. |
|
|
|
|
| M L U s e r S o n g | D e l e t e ? |
| [ 3 0 : x x x x x x x ] | x x x K B |
| • To exit the selection screen, press the NO button. | |
2 | Use the dial to select the song you want to delete. | |
3 | Press the YES button to delete the song. | |
| • The display should now show 0 kilobytes. | |
28 | 04.8.24, 4:34 PM |