Using a Memory Card
Loading a File from a Memory
Use the procedure below to load data from a memory card into the digital piano memory.
IMPORTANT!
•Before you can use a SmartMedia card with this digital piano, you need to perform the procedure below to format it. After formatting the card, transfer SMF data from your computer to the card.
•Formatting a SmartMedia card with this digital piano automatically creates a folder named “CASIO_MD” on the card. When transferring SMF data from your computer to the card for use by the digital piano, be sure to store it in the “CASIO_MD” folder.
Getting Ready
•Insert the SmartMedia card that contains the data you want to recall into the digital piano’s card slot.
NOTE
•Depending on the type and the amount of data involved, a memory card data save or load operation can take anywhere from a few minutes to more than 10 minutes to complete. The message “Please Wait” will remain on the display to indicate that a data save or load operation is being performed.
IMPORTANT!
•Never try to perform any operation while “Please Wait” is displayed. Performing any operation can cause digital piano’s built in memory data or the memory card data to be deleted, or damage data and make it impossible to read.
8 | Use the dial to select the destination of the file you are | ||
| loading. |
| |
|
| ||
To load this type of file: | Select this destination: | ||
|
| ||
Music Library playback tune | User song number/name | ||
|
|
| |
Song Memory data | Song number | ||
(Song 1 or Song 2) | |||
|
| ||
|
| ||
Registration memory setup | Bank number | ||
|
|
| |
9 | After selecting the destination, press the EXECUTE | ||
| button. |
| |
• This will display a confirmation message asking whether you really want to load the data.
10 Press the YES button to load the data.
•The message “Please Wait” will remain on the display while the load operation is being performed. Never try to perform any other operation on the digital piano while the card is being accessed. The screen in step 2 will reappear after the load operation is complete.
•If you do not want to continue with the load operation, press the NO button. This will return to the screen in step 8.
11 | After you are finished loading the data, press the CARD |
| FUNCTION button so its indicator lamp goes out. |
To load file data from a memory card
1
2
Press the CARD FUNCTION button.
•This causes the indicator lamp above the button to light.
Use the dial to display the “Load” screen.
3 | Press the [] cursor button to advance to the file type |
| selection screen. |
4 | Use the dial to select the type of file you want to load. |
5 | Press the [] cursor button to display the file name |
| selection screen. |
6 | Use the dial to select the name of the file you want to |
| load. |
7 | Press the [] cursor button to advance to the next |
| screen. |
31 | 04.8.24, 4:34 PM |