Selecting CHORUS
Perform the following steps to select CHORUS.
NOTE

Applying Effects to Tones

4Use the [+] and [–] buttons or the number buttons to scroll through the reverb types until the one you want is displayed, or use the number buttons to input the reverb number you want to select.

•See the separate Appendix F for information about the reverb types that are available.

•Here you could also change the parameters of the effect you selected, if you want. See “Changing the Settings of REVERB Parameters” for more information.

Changing the Settings of REVERB Parameters

You can control the relative strength of a reverb and how it is applied. See the following section titled “REVERB Parameters” for more information.

1After selecting the reverb type you want, use the [￿] and [￿] CURSOR buttons to display the

parameter whose setting you want to change.

•This displays the parameter setting screen. Example: To set the Reverb Time parameter

0 7 2 S R v T i m e

2Use the [+] and [–] buttons or the number buttons to input the parameter setting you want.

3Press the EFFECT or EXIT button.

• This returns to the tone or rhythm selection screen.

REVERB Parameters

Reverb effects are associated with either a reverb type or delay type. Parameter settings depend upon the associated type.

Reverb Type (No. 0 to 5, 8 to 13)■Reverb Level (Range: 000 to 127)

Controls the reverb size. A larger number produces larger reverb.

■Reverb Time (Range: 000 to 127)

Controls how long reverb continues. A larger number produces longer reverb.

■ER Level (Initial Echo Sound) (Range: 000 to 127)

This parameter controls the initial reverb volume. The initial echo sound is the first sound reflected from the walls and ceiling when a sound is output by this digital piano. A larger value specifies a larger echo sound.

■High Damp (Range: 000 to 127)

Adjusts the damping of high frequency reverberation (high sound). A smaller value damps high sounds, creating a dark reverb. A larger value does not damp high sounds, for a brighter reverb.

Delay Type (No. 6, 7, 14, 15)■Delay Level (Range: 000 to 127)

Specifies the size of the delay sound. A higher value produces a larger delay sound.

■Delay Feedback (Range: 000 to 127)

Adjusts delay repeat. A higher value produces a greater number of repeats.

■ER Level

Same as Reverb Type

■High Damp

Same as Reverb Type

•Whether or not an effect is applied to the parts that are sounding also depends on Mixer Mode Reverb Send, Chorus Send, and DSP on/off settings. See “Mixer Function” on page E-39 for more information.

1Press the EFFECT button so the EFFECT indicator appears on the display.

2Press the [￿] CURSOR button twice.

•This displays the chorus editing screen.

•The chorus type setting screen (step 4) will appear automatically about fives seconds after you press the button.

3Press the [￿] CURSOR button.

4Use the [+] and [–] buttons or the number buttons to scroll through the chorus types until the one you want is displayed, or use the number buttons to input the chorus number you want to select.

•See the separate Appendix G for information about the chorus types that are available.

•Here you could also change the parameters of the effect you selected, if you want. See “Changing the Settings of CHORUS Parameters” for more information.

E-28