Casio PX410R, PX575R Editing Memory Contents, To edit memory contents, To delete specific note data

Song Memory Function

To delete specific note data	4 Use the [￿] and [￿] CURSOR buttons to move to
		the location in track where the note or parameter
1 Perform steps 1 and 2 under “To correct mistakes		you want to change is located.
while step recording” above to display the note		Note editing example
you want to delete.				Velocity			Pitch
2 Press the [￿] CURSOR button twice.
				0 9 0	N o t e	C 4
3 In response to the “Delete?” message that appears
on the screen, press the YES button to delete the
displayed note.
	5 Make any changes in the value that you want.
Editing Memory Contents
		• The actual procedures you use to change a parameter
After you record to digital piano memory, you can recall			depend on the type of data it contains. See “Editing
individual notes and parameter settings (such as tone			Techniques and Display Contents” on page E-61 for
number) and make any changes you want. This means you			details.
can correct misplayed notes, make changes in tone	6 Repeat steps 4 and 5 to edit other parameters.
selections, etc.
The following types of data can be edited.	7 Press the START/STOP button to end editing when
• Note intensity		you are finished.

•Notes

• Chords			NOTE
• Tone numbers			•	The only parameters that can be editted for Tracks 2
• Rhythm number
				through 6 are notes and tone numbers.
• INTRO/ENDING 1 button, INTRO/ENDING 2 button,
			•	In the case of real-time recording, you later can change
VARIATION/FILL-IN 1 button, VARIATION/FILL-IN
				tone numbers you specified while recording to Tracks 1
2 button, SYNCHRO/FILL-IN NEXT button operations
				through 6 is in progress.
			•	You can only change tone numbers that were originally
To edit memory contents			•	set for Tracks 2 through 6 using step recording.
				In the case of real-time recording, you later can change
1 Press the SONG MEMORY button three times to				rhythm numbers you specified while recording to Track
				1 is in progress.
	enter step recording standby, and then use the [+]
			•	You can only change rhythm numbers that were originally
	and [–] buttons to select a song number (0 to 4).			set for Track 1 using step recording.
		Flash	•	You cannot use the edit procedure to add more data to
				a recording.
			•	You cannot move portions of a recording to a different
	S g 0 S t e p	R e c		location within the recording.
			•	Note lengths cannot be changed.

2Use the SONG MEMORY TRACK buttons to select the recorded track that you want to edit.

3Press the [￿] CURSOR button to enter the editing mode.

•The REC indicator disappears from the display, and the STEP indicator flashes.

E-60