• You could also use the number buttons to input a three-digit file number. The file number is shown in the number area of the display.
8 Press the [￿] CURSOR button to advance to the user area selection screen.
9 Use the [￿] and [￿] CURSOR buttons or [+] and [–] buttons to select the user area to which you want to import the loaded file data.
• The numeric area of the display will show the user area number, while the text area will show the user area name*.
* Except registrations and user songs
• The user area selection screen will not appear if the file you selected is a package file or “All Data” file. In this case, skip step 9 and go directly to step 10.
• Pressing the EXIT or [￿] CURSOR button at this time will return you to the file type selection screen.
Press the [￿] CURSOR button to advance to the file type selection screen.
Use the [￿] and [￿] CURSOR buttons to display the “Load” screen.
Press the [￿] CURSOR button to display the Card Mode menu.
2
3
4
5 Use the [￿] and [￿] CURSOR buttons to select the type file you want to load.
6 Press the [￿] CURSOR button to display the file name selection screen.
7 Use the [￿] and [￿] CURSOR buttons or [+] and [–] buttons to select the name of the file you want to load.
Press the CARD button.
• This causes the CARD indicator to appear on the display, and also displays “Card” in the display’s text area.
1
IMPORTANT!
• Never try to perform any operation while “Pls Wait” is displayed. Performing any operation can cause Flash memory, or memory card data to be deleted, and damage the digital piano’s memory and cause it to malfunction.
To recall file data from an SD memory card

Saving Data

0Press the YES button to save the data. This will cause the message “Pls Wait” to appear on the display to indicate that a memory card access operation is being performed. Never try to perform any other operation on the digital piano while the memory card is being accessed. The message “Complete” will appear on the display after data save is complete. After a few seconds, the message will be replaced by the file name selection screen.

•If you do not want to continue with data save, press the EXIT button or the NO button in response to the above confirmation message. This will return you to the user area selection screen in step 7.

AAfter you are finished performing the save operation, press the CARD button to exit the Card Mode.

Loading a File

Use the procedures in this section when you want to load data from an SD memory card into the digital piano’s user area.

IMPORTANT!

•Note the following important points whenever using the SMF Player Mode to play back data saved with the above procedure.

*To perform the procedure below, you must have an SD memory card to which SMF data has been copied from a computer. Insert an SD memory card that you have formatted on the digital piano into the card slot of your computer, and copy the SMF data you want to load into the directory named “MUSICDAT”. Note that you will not be able to load the data if it is not located inside the “MUSICDAT” directory. If you create a sub-directory inside of the “MUSICDAT” directory, the digital piano will not be able to load any data inside the sub-directory.

PREPARATION

•Insert the SD memory card that contains the data you want to load into the digital piano’s card slot.

NOTE

•Depending on the type and the amount of data involved, a data save or load operation can take anywhere from a few minutes to more than 30 minutes to complete. The message “Pls Wait” will remain on the display to indicate that a data save or load operation is being performed.

E-84