Casio PX410R, PX575R Using the Parameter Edit Mode, 1 through, How Channel On/Off Works, Editing DSP Channel Parameters, Editing the Parameters for Channels, Mixer Function

Mixer Function

4 Use the [+]/[–] buttons to select on or off.					Using the Parameter Edit Mode
		Example: To turn the channel off.
					Editing the Parameters for Channels
			O f f	C h a n n e l
					1 through 16
		• Press the [￿] CURSOR button to return to the channel			In the Parameter Edit Mode, you can change the settings of
			selection screen.		ten different parameters (including tone, volume, and pan
		• Pressing the MIXER button returns to the Tone Screen.			pot) for the channel you selected on the Mixer screen.
NOTE					To change parameters
	• The MIDI data display shows only the data for the				1 Press the MIXER button.
	channels selected with the Mixer.
					• This causes a pointer to appear on the display next to
						MIXER.
	How Channel On/Off Works				2 Use the [￿] and [￿] CURSOR buttons to select the
					channel you want.
The following describes what happens and what appears on
the display when you turn a channel on or off.					3 Use the [￿] and [￿] CURSOR buttons to select the
■ On (on)					parameter whose setting you want to change.
					Example: Select volume setting by displaying “Volume”.
This setting turns on the currently selected channel, which is
					• Each press of the [￿] or [￿] CURSOR buttons cycles
indicated by a bar appearing at the bottom of the level meter
						through the parameters.
for that channel. This is also the default setting for all channels
					• You can use the [￿] and [￿] CURSOR buttons to
when the digital piano is turned on.
						change to another channel at any time during this
■ Off (oFF)						procedure.
This setting turns off the currently selected channel, which is						Indicates channel volume of 127
indicated by the absence of the bar at the bottom of the level
meter for that channel.						1 2 7 V o l u m e
					4 Use the number buttons or [+] and [–] to change
		On		Off
					the parameter setting.
					Example: Change the setting to “060”.

0 6 0 V o l u m e

• Pressing the MIXER or EXIT button exits the parameter edit mode.

Editing DSP Channel Parameters

1 While Channel 16 is selected, press the [￿] CURSOR button.

• This selects the DSP channel.

• Pressing the [￿] CURSOR button while the DSP channel is selected returns to Channel 16.

E-40