button.
• This will display a confirmation message asking whether you really want to delete the file.
E-86
After selecting the file, press the [￿] CURSOR
8
• You could also use the number buttons to input a three-digit file number. The file number is shown in the number area of the display.
Press the [￿] CURSOR button to display the file name selection screen.
Use the [￿] and [￿] CURSOR buttons to select the type of the file you want to delete.
Press the [￿] CURSOR button to advance to the file type selection screen.
Use the [￿] and [￿] CURSOR buttons to display the “Delete” screen.
Press the [￿] CURSOR button to display the Card Mode menu.
2
3
4
5
6
7 Use the [￿] and [￿] CURSOR buttons or [+] and [–] buttons to select the name of the file you want to delete.
Press the CARD button.
• This causes the CARD indicator to appear on the display, and also displays “Card” in the display’s text area.
1
Saving Data
Deleting a File
You can perform the procedure in this section to delete a file from the SD memory card.
IMPORTANT!
• Note that the file delete operation cannot be undone. Make sure that you no longer need data before you delete it.
• Deleting a file causes all of the file numbers following it to be reduced by one. If you plan to delete another file, make sure that you do not specify the wrong file number.
PREPARATION
• Insert the SD memory card that contains the file you want to delete into the digital piano’s card slot. Make sure that the write-protect switch of the memory card is not in the write-protect position.
To delete a file from the SD memory card
9Press the YES button to delete the file.

•This will cause the message “Pls Wait” to appear on the display to indicate that a card access operation is being performed. Never try to perform any other operation on the digital piano while the card is being accessed. The message “Complete” will appear on the display after file deletion is complete. After a few seconds, the message will be replaced by the file name selection screen.

•If you do not want to continue with file deletion, press the EXIT button or the NO button in response to the above confirmation message. This will return you to the file name selection screen.

0After you are finished performing the delete operation, press the CARD button to exit the Card Mode.

Formatting an SD Memory Card

Use the procedures in this section to format an SD memory card before using it for the first time, or when you want to delete all of the contents on a memory card.

IMPORTANT!

•Before performing the procedure below, check to make sure that the media does not contain any data you might need.

•The SD memory card format operation performed by your digital piano is a “quick format”. If you want to completely delete all of the data on the card, format it on you computer or using some other device.

PREPARATION

•Insert the SD memory card you want to format into the digital piano’s card slot. Make sure that the write-protect switch of the memory card is not in the write-protect position.