Recording to and Playing Back from Song Memory
Playing Back from Song Memory
1 | Press the SONG MEMORY button so the |
| PLAY indicator lamp is lit. |
2 Use the PART/TRACK button to select the track you want to play back.
●The indicator lamps above the button show the currently selected track.
•To play back Track 1, the L/T1 indicator lamp should be lit.
•To play back Track 2, the R/T2 indicator lamp should be lit.
•To play back Track 1 and Track 2, both the indicator lamps should be lit.
3 Press the START/STOP button.
•This starts playback of the track you selected.
•You can change the tempo setting as a track is playing.
•As a track is playing, you can turn the metronome on or off using the METRONOME button.
•You cannot change the tone setting during playback.
•Press the START/STOP button again to stop playback.
NOTE
•Data played back from Song Memory is not sent from the MIDI OUT terminal.
Deleting Song Memory Data
IMPORTANT!
•The procedure below deletes all of the data from the selected track. Note that the delete operation cannot be undone. Check to make sure you really do not need the data in Song Memory before you perform the following steps.
1Press the SONG MEMORY button so the REC indicator lamp is flashing.
2 Use the PART/TRACK button to select the track you want to delete.
•The indicator lamps above the button show the currently selected track.
•To delete Track 1, the L/T1 indicator lamp should be flashing.
•To delete Track 2, the R/T2 indicator lamp should be flashing.
3 | Hold down the SONG MEMORY button |
| until the REC indicator lamp stops flashing |
and remains lit.
4 Press the PART/TRACK button.
•This deletes the selected track and enters the standby state.