1PHONES jacks
2Speaker connector
3PEDAL connector
4MIDI OUT/IN terminals
5DC 12V jack
6VOLUME knob
7FUNCTION button
8START/STOP button
NOTE
9PART/TRACK button,
L/T1 (Left/Track1) indicator, R/T2 (Right/Track2) indicator
0SONG MEMORY button, PLAY indicator, REC indicator
AMETRONOME button
BSPLIT button
CGRAND PIANO, TONE button
DPower Indicator
EPOWER button
•Key, button, and other names are indicated in the text of this manual using bold type.
About the FUNCTION button
The FUNCTION button makes it possible to perform a variety of useful functions. Note the following general information about using the FUNCTION button.
●An indicator lamp above the FUNCTION button flashes while it is depressed. The lamp goes out when you release the FUNCTION button.
FlashingUnlit
●The FUNCTION button is always used in combination with another button or keyboard key. You hold down the FUNCTION button as you press another button or keyboard key.
•The indicator lamp above the button flashes for a few seconds at high speed to let you know that the setting is complete.
Example: “Selecting and Playing a Tone” on page
●For details about all the keyboard key functions you can perform with the FUNCTION button, see “Setting Control Key Chart” on page
Playing Back All the Music Library Tunes
The following procedure plays back the Music Library tunes in sequence.
1 While holding down the FUNCTION button, press the START/STOP button at the same time.
•This starts sequential playback of the Music Library tunes.
•You can play along with the Music Library tunes on the keyboard, if you want. Tone assigned to the keyboard is the one that is preset for the Music Library tune that is playing.
2 | Press the START/STOP button again to stop |
| Music Library tune play. |