Assembling the Stand
Mounting the Digital Piano onto the Stand
9 Place the digital piano onto the stand.
•At this time, make sure that the pegs on the stand (indicated by in the illustration) enter the holes in the bottom of the digital piano.
•Use the butterfly bolts K to secure the digital piano to the stand.
C
D 
K
Important!
If the stand pegs do not align properly with the holes in the digital piano, loosen the screws Dthat secure one of the side panels to the speaker box C (one side only) one or two turns. Next, mount the digital piano. After the digital piano is mounted properly, retighten the screws Dthat you loosened.
10 Connect the cable to the speaker connector (indicated by in the illustration).
•Cover each of the four side panel screws with screw caps E.
E
E
11 | Orienting the pedal unit plug as shown in |
| the illustration, plug it into the pedal |
connector on the bottom of the digital piano. Secure the pedal cord with the clips H.
H
•Attach the clips Hat two locations to the stand’s side panel as shown in the illustration.
Installing the Music Stand
1 Slide the music stand under the two bolts on the top of the digital piano and then tighten the bolts.