Casio PX700 Other Settings, Changing the Keyboard Touch, Changing the Piano Key, Changing the Pitch of the Piano to Match Another Instrument

Other Settings

Changing the Keyboard Touch

This setting changes the relative touch of the keyboard keys.

1	While holding down the FUNCTION
	button, press one of the keyboard keys
	shown below.
				Weak	Strong
				Off	Normal
▲	▲	▲	▲	▲	▲	▲	▲
C1	C2	C3	C4	C5	C6	C7	C8

Off

Weak (Strong sound is produced even when relatively light pressure is applied.)

Normal

Strong (Normal sound is produced even when relatively strong pressure is applied.)

Changing the Piano Key

Use this setting to raise or lower the overall key of the keyboard in semitone steps.

1 Holding down the FUNCTION button, press the keyboard keys to raise or lower the overall key of the keyboard.

￿ : Raise

￿ : Lower

▲	▲	▲	▲	▲	▲	▲	▲
C1	C2	C3	C4	C5	C6	C7	C8

NOTE

•To return the piano key to C, hold down the

FUNCTION button and press the keyboard keys [￿] and [￿] at the same time.

•After using Transpose to raise the keyboard to a high key, notes played at the highest range of the keyboard may not sound properly for certain tones.

Changing the Pitch of the Piano to Match Another Instrument

Use this setting to raise or lower the overall pitch of the piano. The setting range is plus or minus 50 cents (100 cents = 1 semitone) from the standard pitch of A4 = 440.0Hz.

1 Holding down the FUNCTION button, press the keyboard keys to raise or lower the overall pitch of the piano.

￿ : Raise

￿ : Lower

▲	▲	▲	▲	▲	▲	▲	▲
C1	C2	C3	C4	C5	C6	C7	C8

*Each press of the button changes the current setting by approximately 1 cents (1/100 semitone).

NOTE

•Holding down the FUNCTION button and pressing the keyboard keys [￿] and [￿] at the same time returns tuning to the standard A4 = 440.0Hz.

Using Digital Piano Setup Memory

When setup memory is turned on, the digital piano will remember its setup* whenever you turn it off. If you turn off setup memory, settings will be cleared when you turn off the digital piano.

*song select, keyboard touch, damper pedal setting, layered tone volume balance, split point, metronome beat, and send channel

NOTE

•If the power is turned off during record standby or playback standby of the Song Memory function (see page E-10) when this setting is on, the following settings are retained in memory in addition to the normal settings indicated above. These settings will be recalled from memory the next time the digital piano enters the Song Memory playback standby mode.

Tone, Split on/off, Transpose, Tuning, Chorus

406A-E-015A E-13