Playing with Different Tones
To adjust the volume balance between two layered tones
1. While holding down the FUNCTION button, use the keyboard keys shown below to adjust the volume of the layered tones.
C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8 |
|
| Initial default (Center) |
|
|
| ||
Volume of the layered tone | Volume of the main tone |
| |||||
(Second tone you selected) | (First tone you selected) |
| |||||
•To return the volume setting to its initial default, hold down the FUNCTION button and press both of the keys at the same time.
Using Effects
Reverb : Makes your notes resonate.
Chorus : Adds more breadth to your notes.
1. While holding down the FUNCTION button, use the Reverb or Chorus keyboard key to cycle through the available settings.
•Each press of the Reverb or Chorus keyboard key causes the Digital Piano to beep according to which setting is selected, as shown in the table below.
Reverb Chorus
•Reverb
Number of Beeps | Setting | |
1 | (long) | Off (OFF) |
1 | (short) | Room |
2 |
| Small Hall |
3 |
| Large Hall |
4 |
| Stadium |
• Chorus |
| |
Number of Beeps | Setting | |
1 | (long) | Off (OFF) |
1 | (short) | Light Chorus |
2 |
| Medium Chorus |
3 |
| Deep Chorus |
4 |
| Flanger (whooshing effect) |
■About DSP
DSP makes it possible to digitally produce complex acoustic effects. The DSP is assigned to each tone whenever you turn on Digital Piano power.