Getting Ready 
4. Insert angle brackets H into the gap between the
H
5. From the outside of side panels A and B, temporarily tighten the screws you loosened in step 3, above.
6. Mount pedal unit E onto angle brackets H, which you installed in step 5, above.
E
7. Mount brackets L onto both ends of the pedal unit E.
L
8. Use the screws F to securely fix the brackets
Lto the pedal unit E.
English
F
9. After adjusting the position (height) of pedal unit E, fully tighten the screws that you temporarily tightened in step 5, above.
10. Secure the back board K to the back board
C.
•Screw the screws M into the four holes in the back board K.
C
MX4
K