Getting Ready
11. Go around to the front of the Digital Piano and securely tighten the three screws N shown in the illustration below.
NX3
12. Mount the piano onto the stand. Position the piano so the dowels on the top edges of side panels A and B enter the dowel holes on the bottom of the piano.
•Note that there is nothing anchoring the piano to the stand at this time. Take care to ensure that the piano does not fall off the stand.
13. Use the screws J to securely fix the brackets
at the top of side panels A and B to the bottom of the piano.
JJ
14. After checking to make sure the six screws that secure side panels A and B are fully tightened, cover the heads of the screws with screw caps D.
D
15. With the two screw caps I, cover the heads of the screws that you fully tightened in step 8.
I