Power Outlet

After you finish assembling the stand, turn on the Digital Piano. For details, see “Getting Ready” on page E-39.

Turning Power On or Off

1. Press the P (POWER) button to turn on Digital Piano power.

•This causes the P (POWER) button to light.

•When you turn on the Digital Piano, it performs a power up operation in order to initialize its system. During system initialization the tone button lamps cycle on and off in the sequence for about five seconds to let you know that system initialization is in progress.

2.To turn off the Digital Piano, hold down the P (POWER) button until its light goes out.

NOTE

•Pressing the P (POWER) button to turn off power actually puts the Digital Piano into a standby state. Minute amounts of current continue to flow within the Digital Piano in the standby state. If you do not plan to use the Digital Piano for a long time or if there is a lightning storm in your area, be sure to unplug the AC adaptor from the power outlet.

Auto Power Off

This Digital Piano is designed to turn off automatically to avoid wasting power after no operation is performed for a preset amount of time. The Auto Power Off trigger time is about four hours.

•You also can use the procedure below to temporarily suspend Auto Power Off.

■To disable Auto Power Off
1. While the Digital Piano is turned on, press theP (POWER) button to turn it off.

2.While holding down the FUNCTION button, press the P (POWER) button to turn on the Digital Piano.

21

•Auto Power Off will be disabled at this time.

NOTE

•Turning off the Digital Piano after performing the above steps will re-enable Auto Power Off.

E-4