Recording and Playback

Using the SONG RECORDER Button

Each press of the SONG RECORDER button cycles through the recording options in the sequence shown below.

Lit

Flashing

Off

Playback

Record

Normal

Standby

Standby

 

Recording to a Specific Song Track

After recording to either of the tracks of a song, you can record to the other track while listening to playback what you recorded in the first track.

1. Press the SONG RECORDER button twice so its lamp is flashing.

•At this time the L lamp will flash to indicate that the Digital Piano is standing by for recording to Track 1.

2. While holding down the FUNCTION button,
press the SONG RECORDER (L/R) button to
select the track you want to record.

•Make sure that the indicator lamp for the record track is flashing.

Track 1: L lamp

Track 2: R lamp

Example: Track 1 selected

3. Select the tone and effects (Track 1 only) you want to use in your recording.

•Tone (page E-5)

•Effects (page E-8)

NOTE

•If you want the metronome to sound while you are recording, configure the beat and tempo settings, and then press the METRONOME button. See “Using the Metronome” on page E-9 for more information.

4. Start playing something on the keyboard.

•Recording will start automatically.

5.To stop recording, press the SONG a button.

•This will cause the SONG RECORDER button lamp and the lamp of the track you recorded to change from flashing to lit.

•To play back the track you just recorded, press the SONG a button.

6.After you are finished recording or playing back, press the SONG RECORDER button so its lamp goes out.

E-16