Casio QV-10 B, QV-10A, QV-11, QV 10 B Exposure Warning Indicators, Low Battery Indicator, Memory Full Message, Using the Self-Timer, LCD, the, ones, /PRO, position, Operation, Operation, Note

Recording Images	Operation

Exposure Warning Indicators	Low Battery Indicator
Exposure warning indicators appear on the LCD whenever the light	The low battery indicator (	) appears on the LCD whenever re-
	The low battery indicator (	) appears on the LCD whenever re-
being picked up by the lens would result in under exposure or over	maining battery power drops below a certain level.
exposure of an image.	maining battery power drops below a certain level.
exposure of an image.

Under exposure	Over exposure	When this indicator appears, replace all four batteries with a fresh set
		of new ones. Once the low battery indicator appears, you can expect
Use the procedure described on page 42 to change the aperture or		only about 10 more minutes of operation before total power failure.
		• See page 25 for details on how to replace batteries.
change the lighting of the image so the indicator disappears from the		• See page 25 for details on how to replace batteries.

LCD.		Memory Full Message
		Memory Full Message
Important!		The message “MEMORY FULL” appears on the LCD whenever you
• The exposure warning indicators also appear when lighting is out-		press the shutter button while camera memory is full.

side the range of the camera. In such a case, changing the aperture
will not clear the indicator from the LCD.

•The manual exposure adjustment procedure (page 41) cannot be used when an exposure warning indicator is on the LCD. Clear the warning indicator by changing the aperture switch setting.

If you want to record more images, you must first delete some of the images already stored in camera memory. See page 70 for details on how to delete images.

4546

		Recording Images	Operation
Using the Self-Timer
Using the Self-Timer			Note
With the Self-Timer, the shutter is released 10 seconds after you			• If you use the Self-Timer with the lens body rotate 180		° (page 38),
press the	/PROTECT button.			you can view the countdown on the LCD while waiting for the shut-
1.	Enter the Record Mode.			ter to release.
1.	Enter the Record Mode.
	• Set the function switch to the REC		Important!
	• Set the function switch to the REC
	position.		• If battery power is low, camera power may turn off while a count-
	position.
				down is in progress. If this happens, replace the batteries with new

2. Start the Self-Timer operation.				ones.
2. Start the Self-Timer operation.

•Place the camera securely on a

tripod, desk or other stable sur- face, with the image to be recorded in the LCD.

•After composing the image, press

the	/PROTECT button.

•A 10-second countdown starts on the LCD. The shutter will release automatically when the end of the countdown is reached.

•To cancel on ongoing Self-Timer

operation, press the	/PRO-
TECT button or shutter button.

4748