Casio QV-10 B, QV-10A, QV-11, QV 10 B Accessing Auto Play Features, To specify the display format, sequence, Operation, Operation, Page Range, • See page, ture screens, back to PLAY, ture screens

Playing Back Images	Operation

Accessing Auto Play Features		To set the auto play speed
You can call up screens for control of auto play features by pressing		1. Display the auto play speed screen.
the MODE button while an auto play operation is in progress.		1. Display the auto play speed screen.

1.	Enter the Playback Mode and turn on the camera.
2.	Start the auto play operation.
3. Press the MODE button to display the screen for the auto
	play feature you want to use.

•Each press of MODE changes the screen in the following

sequence.			Indicates the number of seconds between page changes.
			• See page 61 for information on how to display auto play fea-
			ture screens.
Speed Setting	Display Format	Page Range	2. Use [+] (increase) and [–] (decrease) to change the auto
Speed Setting	Display Format	Page Range	play speed setting.
			play speed setting.

•	Make sure that there is an image shown and that a page
	change operation is not in progress when you press MODE.
4. After you make the settings you want, press the shutter
button to start the auto play operation.
•	To abort the auto play feature setting procedure without
	changing anything, turn the camera off and on again, or	•	You can set the auto play speed in 3-second increments, in
	change the position of the function switch to REC and then	•	You can set the auto play speed in 3-second increments, in
			the range of 3 to 30.
	back to PLAY.		the range of 3 to 30.
	back to PLAY.	3. After you are finished setting the auto play speed, you can

		use MODE to change to another screen or press the shut-
		ter button to start the auto play operation.

6162

Playing Back Images	Operation

To specify the display format	To specify the page range
1. Display the display format screen.		1. Display the page range screen.
		• See page 61	for information on how to display auto play fea-
		ture screens.

•See page 61 for information on how to display auto play fea- ture screens.2.The highlighted display format is the one that is currently

selected. Use [+] (right) and [–] (left) to change the display	Indicates the starting page number.

format selection.	• For the starting page number, the page range screen shows
	either page 1 or the last page number you specified.
	2. Use [+] (increase) and [–] (decrease) to change the starting
	page number.

3. After you are finished setting the display format, you can use MODE to change to another screen or press the shutter button to start the auto play operation.

63 64