Casio QV-10 B, QV-10A, QV-11, QV 10 B To start the auto play operation, Other Auto Play Features, Using Auto Play, Using the Zoom Function, tion, play, Operation, Operation, 3 seconds, 3 seconds

Playing Back Images

Operation

Using the Zoom Function

Changing the Location of the Zoom Area

This function lets you select a specific part of a stored image and

enlarge it to twice its normal size.

Display an image.

Press the ZOOM button to zoom in on the center of the im-

age.

• The center of the image is enlarged to twice its normal size.

• Pressing [–] moves the zoom area in the opposite direction.

Notes

• If the page number is displayed in the upper right corner of the

3. Change the position of the zoom area.

screen when you perform a zoom operation, the number is replaced

by a zoom area indicator. This indicator shows you what part of the

• You can use [+] and [–] to change the position of the zoom

image is currently enlarged on the display. You can turn the zoom

area in the sequence shown on page 58.

area indicator on and off by pressing the DISP button.

Press the ZOOM button again to return the image to its

original size.

Zoom area indicator

• Note that turning display of the zoom area indicator on and off during a zoom operation also affects the display of the image number in the Record Mode (page 52), and the memory page number in the Playback Mode (page 43).

5758

Playing Back Images	Operation

Using Auto Play
Using Auto Play
Auto play lets you automatically scroll through the camera’s memory
pages quickly and easily. You can specify the speed of the scroll, the
display format (1-page, 4-page, or 9-page), and the range of pages to

be included in the scroll operation.		3 seconds	3 seconds
		3 seconds	3 seconds
Important!		• Auto play continues to loop through the memory pages. This
• The camera’s Auto Power Off function (page 29) does not function		means that when it reaches the last	page, it starts again
		from the first page.
while an auto play operation is in progress. If you forget to turn the		from the first page.

camera off, there is the danger that auto play will continue until bat-
teries are dead. To avoid this, make sure that you stop the auto play	3. Press the shutter button to stop the auto play operation.
operation and turn the camera off when you finish viewing.
		• Pressing any button except the
To start the auto play operation		• Pressing any button except the
To start the auto play operation		MODE button stops the auto play
1. Enter the Playback Mode and turn on the camera.		operation.
1. Enter the Playback Mode and turn on the camera.		• Note that the buttons of the cam-
2. Start the auto play operation.		• Note that the buttons of the cam-
2. Start the auto play operation.		era do not operate while a page
		era do not operate while a page
• Hold down the [+] and [–] buttons until the message “AUTO		change operation is in progress.
PLAY START” appears.		Make sure that an image is shown
• There must be at least two images (two pages) recorded in		on the display when you press a
		button to stop the auto play opera-
memory to use the auto play operation. Otherwise, the		button to stop the auto play opera-
memory to use the auto play operation. Otherwise, the		tion.
"AUTO PLAY START" message will not appear on the dis-		tion.
"AUTO PLAY START" message will not appear on the dis-
play.
	Other Auto Play Features
	When using auto play, you can specify the speed of the scroll, the
	display format (1-page, 4-page, or 9-page), and the range of pages to
	be included in the scroll operation.

•After about one second, this message disappears and the auto play operation starts.

5960