General Guide

GettingOperationAcquaintReferenced

 

Connecting the Wrist Strap

 

To record an image

 

Pass the wrist strap through the hole on

 

• Be sure to load batteries (page 25) before operation.

 

the side of the camera a shown in the

2

 

 

illustration.

 

 

 

 

 

 

1

 

5

 

 

 

2

Using the Cleaning Cloth

 

 

 

Use the cleaning cloth to wipe finger-

 

3

1

prints and smudges from the LCD and

 

lens.

 

4

 

• Be sure to avoid applying too much

 

 

pressure when wiping the LCD. Too

 

 

 

much pressure can cause permanent

 

 

 

discoloration, abnormal images, and

 

1. Set to REC.

 

cracks.

 

 

 

2. Slide to the right to turn on power.

 

 

 

 

Using the Soft Case

 

3. Set to NORMAL.

 

 

• Set to MACRO for close-ups. See page 40 for information on

 

Keep the camera in its soft case to pro-

 

 

 

the difference between NORMAL and MACRO.

 

tect it when not in use.

 

 

 

4. While viewing the image on the LCD, slowly move the cam-

 

 

 

 

 

 

era so the image appears as you want it.

 

 

 

5. Press the shutter button.

 

 

 

• The message “WAIT” appears on the LCD for about four

 

 

 

seconds along with the image that was recorded when you

 

 

 

pressed the shutter button. You can use the camera to take

 

 

 

the next picture after the “WAIT” message disappears.

 

 

 

• The camera can hold up to 96 images in memory

 

 

17

18

 

Operation Reference

Getting Acquainted

 

 

 

To view images stored in memory

 

To delete images stored in memory

 

You can recall images and view them on the LCD.

 

After you delete an image you can store a new one it its place.

 

 

3

 

2, 6

5

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

3

(2)

1

 

4

 

1. Set to PLAY.

 

1.

Display the image you want to delete (page 19).

 

2. Slide to the right to turn on power.

 

2.

Press DEL.

 

• An image appears on the LCD when power comes on.

 

 

• The following steps are performed in accordance with

 

3. Press [+] to display the next memory page or [–] to display

 

prompts that appear on the LCD.

 

the previous page.

 

3. Press [+].

 

 

 

4.

A message appears to confirm that you really want to de-

 

 

 

 

lete the image.

 

 

 

 

• To abort the delete operation without deleting anything,

 

 

 

 

press DEL here.

 

 

 

5.

Press the shutter button to delete the image shown on the

 

 

 

 

LCD.

 

 

 

6.

After you finish deleting all the images you want, press

 

 

 

 

DEL to quit the delete procedure.

 

 

19

20