Power Supply

Getting Acquainted

 

 

 

Auto Power Off

Using AC Power

Power automatically turns off whenever you do not perform any cam-

To power the camera from standard AC power, use the AC adaptor

era operation for a period of time. Power turns off after about two
(AD-C60) that comes with this camera.
minutes in the Record Mode or after about five minutes in the Play-

 

back Mode.

AC power terminal

* To restore power, simply slide the POWER switch to the right as
AD-C60

 

you normally do.

 

AC outlet

 

 

AC Adaptor precautions

 

 

•

Always be sure to use the AD-C60

 

 

 

AC adaptor only. Using any other

Important!

 

 

AC adaptor can cause damage to

 

 

the camera not covered by the war-

The Auto Power Off function does not operate under the following

 

 

 

 

ranty.
conditions.

 

 

Caution

•

When unplugging the AC adaptor

• During Auto Play (page 59)

 

 

from the wall socket, be sure to

• When operations are being performed on a computer connected to

 

 

 

 

grasp the adaptor (not the cord).

the camera via the camera’s DIGITAL terminal (page 81).

 

•

Avoid an undue bending, pulling,

 

 

 

 

 

and twisting of the AC adaptor's

 

 

 

cord, and never try to lengthen the

 

 

 

cord by splicing it with other wire.

 

 

 

 

2930

Power Supply

Getting Acquainted

 

 

 

•If the power cord should become damaged (exposed wires, discon- nection, etc.), please purchase a new AC adaptor. Use of a dam- aged power cord may cause fire or electrical shock.

•Be sure to switch power off before connecting or disconnecting the adaptor.

•Always turn camera power off before disconnecting the AC adaptor, even if the camera has batteries installed. It you don't the camera will turn off automatically when you disconnect the AC adaptor. Even so, you run the risk of damaging the camera whenever you disconnect the AC adaptor without first turning power off.

•The AC adaptor may become warm to the touch after extended pe- riods of use. This is normal and is not cause for alarm.

•After use turn off the power switch of the camera and unplug adap- tor from the AC outlet.

3132