TROUBLESHOOTING

Power Supply

Recording

 

 

Symptom

 

Probable Cause

 

Action

No power

1.

Batteries not loaded correctly.

1.

Correctly load batteries (page E-35).

 

 

 

2.

Dead batteries

2.

Replace all four batteries with a set of new ones

 

 

 

 

 

 

(page E-35).

 

 

 

3.

Wrong AC adaptor

3.

Use only recommended AC adaptor .

 

 

 

4.

Lens cover is not completely open.

4.

Completely open the lens cover.

 

 

 

 

 

 

 

Sudden power failure

1.

Auto Power Off

1.

Turn power back on.

 

 

 

2.

Low battery power

2.

Replace all four batteries with a set of new ones

 

 

 

 

 

 

(page E-35).

 

 

 

3.

Use of manganese batteries.

3.

Replace manganese batteries with alkaline,

 

 

 

 

 

 

lithium or Ni-MH batteries.

 

 

 

 

 

 

” indicator on LCD

Batteries are about to go dead.

Replace all four batteries with a set of new ones

 

 

 

 

 

 

(page E-35).

No recording when shutter

1.

The lens cover is closed.

1.

Slide open the lens cover.

button is pressed

2.

Flash unit is charging.

2.

Wait until flash unit charging is finished.

 

 

 

3.

The message “MEMORY FULL” is on the moni-

3.

Delete images you no longer need from camera

 

 

 

 

tor screen.

 

memory.

 

 

 

4.

Insufficient memory card capacity or no memory

4.

Load a memory card.

 

 

 

 

card loaded in camera.

 

 

 

 

 

 

 

Auto Focus cannot focus

1.

Lens is dirty.

1.

Clean off the lens.

the image.

2.

The object you want to focus is not in the focus

2.

Aim the camera so the object you want to focus

 

 

 

 

frame.

 

is in inside the focus frame.

 

 

 

3.

Conditions make it impossible to obtain proper

3.

Switch to the Manual Mode and focus manually.

 

 

 

 

focus.

 

 

 

 

 

4.

Camera is unsteady or shaking.

4.

Use a tripod to steady the camera.

 

 

 

 

 

 

 

E-111