POWER SUPPLY
Setting SLEEP and AUTO POWER OFF Trigger Times
1.Slide open the lens cover.
2.Press MENU.
3.Select “Options” 
“Power Save” 
“Power Save”.
• “Options” appears on the advanced menu only.
Initializing Power Save Trigger Times
Use the following procedure to return SLEEP and AUTO POWER OFF trigger time settings to their initial factory defaults (SLEEP: 1 minute, AUTO POWER OFF: 2 minutes).
IMPORTANT!
Note that performing the following procedure to initialize the power save trigger time settings also initializes mode memory (page
4.Use [H] and [G] to select “Sleep” or “Auto
Power Off”.
5.Select the trigger time you want to set.
6.When the settings are the way you want them, press SET.
7.Select “Exit”.
1.Slide open the lens cover.
2.Press MENU.
3.Select “Options” 
“Power Save” 
“Power Save”.
• “Options” appears on the advanced menu only.
4.Use [H] or [G] to select “Sleep” or “Auto Power
Off”.
5.Select “Restore”.
6.Select “Exit”.