OTHER RECORDING FUNCTIONS
Turning power on default settings on and off
1.Slide open the lens cover.
2.Press MENU.
3.Select “Options”.
4.Select “Mode 1” or “Mode 2”.
5.Select “Mode 1” or “Mode 2”.
Initializing Mode Memory
Use the following procedure to initialize the mode memory.
IMPORTANT!
Note that performing the following procedure to initialize mode memory also initializes power save trigger time settings (page
1.Perform steps 1 through 3 under “Turning power on default settings on and off”.
•“Options” appears on the advanced menu only.
2.Select “Power Save”, “Mode 1” or “Mode 2”.
3.Select “Power Save”, “Mode 1” or “Mode 2”.
4.Select “Restore”.
•The following table shows the mode memory status of each item following the above procedure.
6. | Select the item whose setting you want to |
| 5. Select “Exit”. |
| |||
7. | change. |
|
|
|
| ||
|
| ||
Select “On” or “Off”. |
|
| |
|
| ||
|
| ||
|
| ||
|
| ||
8. | • Repeat steps 6 and 7 for other items if you want. |
|
|
|
| ||
|
| ||
Select “Exit”. |
|
| |
|
| ||
|
| ||
|
| ||
|
|